Felt packaging for the pole;
Plywood packaging for the other parts based on LCL;
Carton and bubble wrap packaging for FCL.
Samples:7 days. Bulk order: about 2 weeks.
SOKOYO,The Top5 Manufacturer of Solar Led Street Light in China. We are pleased to offer you the solution of solar led street light, as well as all separated related components.
Technical Data for SOKOYO Solar Street Light :
SOKOYO Solar Street Light Working Mode
5-13 working hours per day, 2-7 rainy days back-up
1. Monocrystalline Solar panel from 30W to 310W, efficiency of more than 18.5%
2. Polycrystalline solar panel from 30W to 270W, efficiency of more than 17.8%
3. A GRADE high efficient solar panel
4. Hydrophobic layer with higher light absorption and minimal surface dust
5. 5 years warranty for solar panels; 20 years power generation capacity
1. Lifespan:5-8 years,
2. Long service life (3200 cycles @ 30% DOD)
3. Better Weather-ability (-20 ºC ~ 50 ºC)
4. Fully sealed construction ,maintenance free long life of up to 5 years
Intelligent Solar Controller
1. PWM & MPPT available
2. Over-charging/discharging Protection
3. Reverse-connection Protection
1. Ligh Power LED
2. Lifespan: >80000Hrs
3. White Color,140LM/W,30Lux,6500K,IP65,120 Degree Angle
1. Hot-Dip Galvanized, powder coating
2. Lifespan: More than 20 years
3. Equipped With Arm, Bracket, Flange, Fittings, Cable
4. Resistant to Wind: ≥150KM/H
SOKOYO lithium battery integrated led lamp wifi smart solar street light
1. LED Lamp
Features of lithium all in one solar street light:
Lithium all in one solar street light integrates the battery and controller( The traditional solar street light system has 5 components (a. solar panel b. gel battery c. controller d. LED light source e. LED lamp ).
It just need to be simply assembling at place, which can avoid wrong cable connection and fussy test after installation.
What’s more, the lithium all in one solar street light doesn’t have high request of installed fields ( traditional solar street light needs enough space to put the anchor bolt and the gel battery).
Components comparision between traditional solar street lights and smart sensor control solar lights
Traditional solar lights
All in one
Smart sensor control lights
Lithium battery and controller integrated
Smart sensor, controller and lithium battery integrated
LED lamp and solar panel integrated
Longer, high line lose
Shorter cable, less line lose
Shortest cable, lowest line lose
Lowest, about 25% of traditional solar lights
Lower, about 30% of traditional solar lights
Lowest, about 35% of traditional solar lights
Lower, about 40% of traditional solar lights
Working mode of all in one and smart sensor control solar lights:
There are two working modes for integrated light: full power working mode and energy saving working mode.
Energy saving working mode means the light will dim to 30 % working efficiency when nobody passes by. When people or vehicle passe by, the sensor will detect the motion and the light will lighten up to 100% efficiency. The brightness of the light will be reduced gradually to 25% after the people and vehicle pass away.
Advantage of all in one and smart sensor control solar lights:
Simple design, portable, practical.
Powered by solar, saving energy and environmental friendly, its installation is not subject to city grid.
Large capacity lithium battery, lifespan about 5-8 years, twice lifespan of the traditional gel battery, lowering the battery maintenance rate of solar street lights.
High efficiency of usage during the lithium cycle, avoiding the low efficiency of traditional gel battery after discharge which leads to lack of energy.
Integrated lithium battery and controller, no complex assembly work, less wiring connection mistake, making the solar street lights installation easy and simple.
No additional wiring is needed, avoiding the mistake of wrong calculation in wiring length and wiring configuration.
Lithium battery installed on pole near the lamp, closer distance and less energy lose, ensuring high efficiency of power supply. What’s more, the hanging battery increases the difficulty for vandalism and theft than buried battery underground.
Components for SOKOYO intelligent led lamp combined with lithium battery microwave sensor light
2. Solar Panel
SOKOYO uses only high efficiency poly/mono solar panel, with conversion rate 17%~19%. Before leaving factory, every solar panel has to go through at least 5 tests: solar cell test, impurity test, EL test, circuit test, electrical current&voltage test.
Here is the process of solar panel production: sorting-solar cell test-cell cutting-second sorting-soldering-stacking up-EL test-lamination-putting on frame-fixing junction box-cleaning-test-packing
3. SOKOYO Lithium battery
Because the feature of low self-discharging rate, stable voltage and fast charging , the lithium battery has been gradually used in the solar street lights these days.
Operating temperature range : charging temperature:0℃- 65℃ discharging temperature: -25℃-65℃ Storage temperature : -5℃--35℃
4. SOKOYO Lighting Pole
Q235 steel, one-time molding taper pole, automatic submerged arc welding technology, hot-dip galvanizing and powder coating, passing the salt spray test, strong corrosion-resisting character, life expectancy ≥ 30 years
Production Process: Plate-incision-bending-Welding and burnish-straightening and polishing-hot galvanizing –powder coating
Packaging & Shipping
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time? A: Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for led light order? A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive? A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light? A: Firstly,let us know your requirements or application. Secondly,We quote according to your requirements or our suggestions. Thirdly,customer confirms the samples and places deposit for formal order. Fourthly,We arrange the production.
Q6. Is it OK to print my logo on led light product? A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products? A: Yes, we offer 2-5 years warranty to our products.
Q8:How to deal with the faulty? A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%. Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution i ncluding re-call according to real situation.